Motors

Build a nimble 2-inch FPV drone with the GEPRC SPEEDX2 1303.5 motor

Lightweight, responsive, and designed for compact builds, the SPEEDX2 1303.5 gives FPV pilots a capable brushless motor for 2-inch cinewhoops and 2.5-inch freestyle drones. Its 6.5 g frame, hollowed design, and 7075-T aircraft-aluminum rotor help keep weight down while supporting heat dissipation and dependable performance.

The raised propeller platform is designed to improve compatibility with inverted-mounted props and help prevent contact between a high-pitch propeller and the top of the rotor. A carefully designed magnetic circuit supports smooth, stable motor response when you’re ready to take your build into the air.

Choose the KV that fits your setup

• 3800KV: Rated for 4–6S LiPo, with a maximum power of 139.9W and maximum current of 6.3A.
• 5500KV: Rated for 2–4S LiPo, with a maximum power of 128.8W and maximum current of 8.7A.

Key specifications

• Motor: GEPRC SPEEDX2 1303.5, 9N12P
• Stator: 13 mm diameter × 3.5 mm height
• Dimensions: 17.35 × 11.7 mm
• Shaft: 2 mm inner / 1.5 mm outer diameter
• Wiring: 28 AWG, 90 mm leads
• Mounting: 9 × 9 mm, M2
• Recommended ESC: 35A
• Color: Titanium
• Weight: 6.5 g (with 90 mm wire)
• Suggested builds: 2-inch prop-guard drones or 2.5-inch freestyle drones

In the package

• 1 × SPEEDX2 1303.5 motor
• 6 × M2 × 6 mm screws
• 6 × M2 × 8 mm screws

Ready to build? Select the 3800KV or 5500KV option that matches your battery and setup, then add the SPEEDX2 motor to your cart and get your next FPV build moving.

Introducing the all-new iFlight XING E PRO 2306 Brushless Motors! These motors are perfect for racing drones, taking flight performance to a whole new level. Whether it's for speed or stability, the XING series is sure to deliver. With a high-strength 4mm steel shaft, N52SH high-temperature magnets, and 16x16mm hole pattern you know your drone will remain powerful and durable even in the tightest of spaces! Plus, you can rest assured that each part of these efficient motors is crafted with utmost perfection; from single strand copper winding to CNC machined aluminum top and base parts. As a pilot, you need confidence in your machine; that's why with iFlight XING E PRO 2306 Brushless Motors you'll have no problem relying on the power they generate coupled with their exceptional quality.

SPECIFICATIONS

• Configuration: 12N14P

• Stator Diameter:24mm

• Magnets: N52SH Curved

• Bearing Size: 9x4x4

• Shaft Diameter: 4mm / Steel

• Base Mounting Pattern: 16x16mm M3 Thread

• Motor Dimension:29.5x18.7mm

• Weight:33.1g (150mm wires)

• Idle Current @12.6v (Io):2.1A

• Cells (LiPo): 2-6S

• Max Burst Current <10s:55.22A

• Max Power (W) 60s:885.4W

• Internal Resistance (Rm):40.6mΩ

• Motor Wire Length: 150mm / 20AWG

 Since its initial release in 2018, the XING series NextGen motors have established themselves as the new industry standard. What factored into the success - the one-of-a-kind curve, a damping ring for bearing protection or the pairing of titanium alloy shafts with top-notch NSK bearings? After years of imitations and comparisons, it's time for us to elevate the benchmark once again. 

The XING motors just got seriously upgraded for smooth, reliable, and powerful performance! The manufactory precision work reaches a new level, sporting faster response time with center slotted N52H curved arc magnets -- a cutting-edge motor design.  Get the locked-in flight feeling you crave with XING2 motors! Quick PID loop translations prevent common FPV translation delays between braking and accelerating. By eliminating this characteristic bottleneck, we are redefining aerial drone performance.

Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. Smaller air gaps result in lower reluctance and higher magnetic flux - the magnetic equivalent of current - leading to greater efficiency and power!

Early 2018 we started to put o-rings on the top of the bearings between motor bell and stator. This absorbs impact and tightens the bearing gap to minimize high RPM-induced vibrations after a crash. It can also reduce the axial impact force just enough to keep the bearings smooth and quiet. The new XING series comes equipped with the same high-quality 7075 bells, O-ring bearing protection, and all the other must-have features found in the original design. However, with a fresh new shape and design, it's sleeker and more stylish than ever before.

SPECIFICATIONS

• Model: XING2 2207
  

• KV: 1855KV / 2755KV (select)

• Version: CW Screw Thread

• Input Voltage: 4S/6S Lipo

• Configuration: 12N14P

• Stator Diameter: 22mm

• Stator Length: 7mm

• Weight: 31.6g with short wire

• Wire length:20AWG 160mm

• Mounting pattern: 16*16mm

PACKAGE

• 1x XING2 2207 Brushless Motor (KV is optional)

• 4xm3*6 screws

• 1xM5 Flanged Nylon Insert Lock Nut

Introducing the Dji Mavic mini arm power motor! Don't miss out on this exclusive replacement part and keep your DJI Mavic mini functioning at its best. Crafted with steel and plastic, you can trust that this power motor will have your drone working like new again. Nothing will stand in your way when you need to fly like a pro with the reliable precision of this power motor. Unlock a world of possibilities and experience something truly special with the Dji Mavic mini arm power motor. It's durable, dependable, and made for the skies - let nothing stop you from taking flight! Don't wait any longer, get your hands on one today and experience something extraordinary! 

Package:

Motor * 1/2

SPECIFICATIONS:

Overall dimension: Φ28.5 × 32.5mm

1700KV

Prop mounting shaft diameter: M5
Position of installation hole: 16 × 16mm ， M3
Prop: 5inch ~ 6inch
Bearing ： 4 * 9 * 4
Shaft Diameter: 4mm
Wire size lead: 24AWG × 190mm
Slots / poles: 12N14P
magnetic wire: enameled wire class H 220 ℃
stator Diamter: 22mm
Height of the stator: 7.5 mm
Rated Voltage: 4 ~ 6S (~ 16.8V 25.2V)
peak current : 38.5 A
Maximum power: 924 W

KV: 1800
Prop mounting shaft diameter: M5
Position of installation hole: 16 × 16 mm ， M3
Prop: 5inch ~ 6inch
Bearing ： 4 * 9 * 4
Shaft Diameter: 4mm
size of lead wire: 24AWG × 190mm
Slots / poles: 12N14P
magnetic wire: enameled wire class H 220 ℃
stator Diamter: 22mm
Height of the stator: 7.5 mm
Rated Voltage: 4 ~ 6S (~ 16.8V 25.2V)
Peak current: 42.1A
Maximum power: 1011W

KV: 2450
Installation hole position: 16 × 16 mm, M3
Prop: 5inch ~ 6inch
Bearing ： 4 * 9 * 4
Shaft Diameter: 4mm
size of lead wire: 24AWG × 190mm
Slots / poles: 12N14P
magnetic wire: enameled wire class H 220 ℃
stator Diamter: 22mm
Height of the stator: 7.5 mm
Rated Voltage: 3 ~ 4S (~ 12.6V 16.8V)
Peak current: 44.1A
Maximum Power: 706W

KV: 2650
Position of installation hole: 16 × 16mm ， M3
Prop: 5inch ~ 6inch
Bearing ： 4 * 9 * 4
Shaft Diameter: 4mm
Size lead wire: 24AWG × 190mm
Slots / poles: 12N14P
magnetic wire: enameled wire class H 220 ℃
stator Diamter: 22mm
Height of the stator: 7.5 mm
Rated Voltage: 3 ~ 4S (~ 12.6V 16.8V)
Current peak: 51.2A
Maximum power: 819 W

PACKAGE:

1 x TOKA 2207.5 brushless motor

SPECIFICATIONS:

PACKAGE:

SPECIFICATION: