Racing drones
Geprc Cinego Hd Vista Dji 6s 155mm Fpv Racing Rc Drone
SPECIFICATIONS:
Size: 30.45 x 29 x 13mm
Weight: 19g
Antenna connector: U.FL
Stack: 20 × 20
Maximum output power: from 200mw to 1200mw
Range: 4 km max
High quality mode: 30-40ms
Low latency mode: 21-28ms
Camera Compatible: DJI HD
Compatible with glasses: DJI HD
Top plate: 2 mm
Bottom plate: 3 mm
Side plate: 1.5mm
Wheelbase: 155 mm
Motors: GR1507 2800KV
Recommended battery: 6S 850mAh (not included)
Recommended camera: GoPro Hero 7/8 (not included)
Full 3K carbon fiber
FEATURES:
- With Caddx Vista Digital HD video transmission system, Goggle can record 720P video
- Equipped with 3 inch tpu protective frame, ensure safety and reliability
- Full 3K carbon fiber
- Flight control system: STABLE SYSTEM F405
- Two types of power. The 6S version uses a GR1507 2800KV motor. 4S version uses GR1507 3600Kv motor
- Full FC Soft System: Provides a clean operating environment for the gyroscope.
- Exquisite Assembly Process: Eliminate any potential installation problem.
- Receiver: PNP (built-in DJI receiver) / Frsky R-XSR / Frsky XM + / TBS Nano RX
PACKAGE:
1 * CineGO HD CineWhoop 6S Quadcopter
4 * 3 inch accessories
SPECIFICATIONS:
Size: 30.45 x 29 x 13mm
Weight: 19g
Antenna connector: U.FL
Stack: 20 × 20
Maximum output power: from 200mw to 1200mw
Range: 4 km max
High quality mode: 30-40ms
Low latency mode: 21-28ms
Camera Compatible: DJI HD
Compatible with glasses: DJI HD
Top plate: 2 mm
Bottom plate: 3 mm
Side plate: 1.5mm
Wheelbase: 155 mm
Motors: GR1507 2800KV
Recommended battery: 6S 850mAh (not included)
Recommended camera: GoPro Hero 7/8 (not included)
Full 3K carbon fiber
FEATURES:
- With Caddx Vista Digital HD video transmission system, Goggle can record 720P video
- Equipped with 3 inch tpu protective frame, ensure safety and reliability
- Full 3K carbon fiber
- Flight control system: STABLE SYSTEM F405
- Two types of power. The 6S version uses a GR1507 2800KV motor. 4S version uses GR1507 3600Kv motor
- Full FC Soft System: Provides a clean operating environment for the gyroscope.
- Exquisite Assembly Process: Eliminate any potential installation problem.
- Receiver: PNP (built-in DJI receiver) / Frsky R-XSR / Frsky XM + / TBS Nano RX
PACKAGE:
1 * CineGO HD CineWhoop 6S Quadcopter
4 * 3 inch accessories
Mobula6 65mm Crazybee F4 Lite Whoop Fpv Racing Drone
SPECIFICATIONS:
Brand Name: HappymodelModel: Mobula6
Item name: 65mm Crazybee F4 Lite 1S BNF Brushless Drone Whoop Racing
Optional Version: Frsky Receiver (Compatible with ACCST D8 / D16, Recommend D8 mode)
Drone Wheelbase: 65 mm
Size: 80 x 80 x 37 mm
Weight: 20g
Flysky Receiver (Compatible with Flysky AFHDS and AFHDS-2A transmitter)
TECHNICAL FEATURES:
- Sensor: MPU-6000 (SPI connection)
-
Power supply: 1S battery input (DC 2.9V-4.35V)
-
Integrated Frsky / Flysky SPI Receiver
-
Channels: 8 channels
-
Transmitter - Frsky_x_lbt Support EU LBT Radio Transmitter
-
Protocol: AFHDS and AFHDS-2A switchable
-
Power supply: 1S LiPo / LiPo HV
PACKAGE:
4x 1S 300mAh 30C Lipo Battery
1x 1S USB Lipo / LIHV Charger
1x Propeller Disassembly Tool
SPECIFICATIONS:
Brand Name: HappymodelModel: Mobula6
Item name: 65mm Crazybee F4 Lite 1S BNF Brushless Drone Whoop Racing
Optional Version: Frsky Receiver (Compatible with ACCST D8 / D16, Recommend D8 mode)
Drone Wheelbase: 65 mm
Size: 80 x 80 x 37 mm
Weight: 20g
Flysky Receiver (Compatible with Flysky AFHDS and AFHDS-2A transmitter)
TECHNICAL FEATURES:
- Sensor: MPU-6000 (SPI connection)
-
Power supply: 1S battery input (DC 2.9V-4.35V)
-
Integrated Frsky / Flysky SPI Receiver
-
Channels: 8 channels
-
Transmitter - Frsky_x_lbt Support EU LBT Radio Transmitter
-
Protocol: AFHDS and AFHDS-2A switchable
-
Power supply: 1S LiPo / LiPo HV
PACKAGE:
4x 1S 300mAh 30C Lipo Battery
1x 1S USB Lipo / LIHV Charger
1x Propeller Disassembly Tool
Geprc Skip Hd Fpv Racing Drone with Caddx Baby Turtle
SPECIFICATIONS:
Brand Name: Geprc
Model: SKIP HD
Version: BNF (with Frsky XM + receiver)
Drone Wheelbase: 118mm
Drone arm plate thickness: 2.5mm
Weight: 72 g (without battery)
Flight time: almost 5 minutes in regular flight
GEPRC GR1105 5000KV 3-4S Motor:
Brand Name: GEPRC
Item name: GR1105 5000KV 3-4S brushless motor
KV: 5000KV
Number of cells (Lipo): 3-4S
Configuration: 9N12P
Stator length: 1.9mm
Shaft diameter: 1.5mm
Motor (dimension (Dia. * Len)): 14.2 * 16mm
Rotor: N52H arc magnets
Weight: 6g
GEP-12A-F4 AIO ESC Flight Controller:
Brand: Geprc
Model: GEP-12A-F4
MCU: STM32F411
IMU: MPU6000 gyro / accelerometer (SPI)
OSD: BetaFlight OSD chip with AT7456E
Baro: NO
BEC output: 5V @ 1A
Firmware target: MATEKF411
MCU ESC: BB21F16G
Continuous current: 12A
Entry: 2-4s lipo
Current meter: 210
Target: G_H_30
Size: 28.5 × 28.5mm board, 25.5mm mounting holes (M2)
Installation hole: 25.5 × 25.5mm, M2
Weight: 5.6g
Support for Dshot600, Oneshot, Multishot
Caddx Baby Turtle V2 1080P Camera:
Image sensor: 1 / 2.7 "CMOS sensor
Horizontal: 800TVL
TV system: NTSC / PAL, variable
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps
Input power: DC 4.5-20V
FPV FOV: 155 °
FOV recording: 170 °
Mini Illumination: 0.01lux
Image resolution: 2 megapixels
Lens: 1.8mm Turbo Eye Lens
Working current: 380mA @ 5V / 160mA @ 12V (low consumption)
OSD menu: Yes (Media voltage display)
Video files: MP4
Audio: support
Electronic shutter: PAL: 1 / 50-100,000 NTSC: 1 / 60-100,100
S/N ratio: > 60 dB (AGC OFF)
Video output: CVBS
Max Micro SD Card Supported: 8-64GB (Requires Class 10 or above, Recommend Class 10 / UHS-I / UHS-II)
Net weight: 12g (more or less)
FUNCTIONALITIES :
- Ultra light weight
- Small turtle Caddx V2 1080P Caemra
- Reliable electronic equipment, reducing weight
- High definition TPU printing
- Full 3K carbon plate
PACKAGE :
1x Geprc SKIP HD 3 racing drones of 118mm FPV
SPECIFICATIONS:
Brand Name: Geprc
Model: SKIP HD
Version: BNF (with Frsky XM + receiver)
Drone Wheelbase: 118mm
Drone arm plate thickness: 2.5mm
Weight: 72 g (without battery)
Flight time: almost 5 minutes in regular flight
GEPRC GR1105 5000KV 3-4S Motor:
Brand Name: GEPRC
Item name: GR1105 5000KV 3-4S brushless motor
KV: 5000KV
Number of cells (Lipo): 3-4S
Configuration: 9N12P
Stator length: 1.9mm
Shaft diameter: 1.5mm
Motor (dimension (Dia. * Len)): 14.2 * 16mm
Rotor: N52H arc magnets
Weight: 6g
GEP-12A-F4 AIO ESC Flight Controller:
Brand: Geprc
Model: GEP-12A-F4
MCU: STM32F411
IMU: MPU6000 gyro / accelerometer (SPI)
OSD: BetaFlight OSD chip with AT7456E
Baro: NO
BEC output: 5V @ 1A
Firmware target: MATEKF411
MCU ESC: BB21F16G
Continuous current: 12A
Entry: 2-4s lipo
Current meter: 210
Target: G_H_30
Size: 28.5 × 28.5mm board, 25.5mm mounting holes (M2)
Installation hole: 25.5 × 25.5mm, M2
Weight: 5.6g
Support for Dshot600, Oneshot, Multishot
Caddx Baby Turtle V2 1080P Camera:
Image sensor: 1 / 2.7 "CMOS sensor
Horizontal: 800TVL
TV system: NTSC / PAL, variable
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps
Input power: DC 4.5-20V
FPV FOV: 155 °
FOV recording: 170 °
Mini Illumination: 0.01lux
Image resolution: 2 megapixels
Lens: 1.8mm Turbo Eye Lens
Working current: 380mA @ 5V / 160mA @ 12V (low consumption)
OSD menu: Yes (Media voltage display)
Video files: MP4
Audio: support
Electronic shutter: PAL: 1 / 50-100,000 NTSC: 1 / 60-100,100
S/N ratio: > 60 dB (AGC OFF)
Video output: CVBS
Max Micro SD Card Supported: 8-64GB (Requires Class 10 or above, Recommend Class 10 / UHS-I / UHS-II)
Net weight: 12g (more or less)
FUNCTIONALITIES :
- Ultra light weight
- Small turtle Caddx V2 1080P Caemra
- Reliable electronic equipment, reducing weight
- High definition TPU printing
- Full 3K carbon plate
PACKAGE :
1x Geprc SKIP HD 3 racing drones of 118mm FPV
Emax Tinyhawk Indoor Fpv Racing Drone
Brand Name: Emax
Item Name: Tinyhawk
Main PCB:
Flight controller: F4 (MATEKF411 firmware)
ESC: 4 in 1 3A
Receiver: EMAX Tiny Receiver (Compatible with Frsky D8 mode)
Camera and VTX:
VTX Power: 25mw
Channels: 37CH
Camera properties: CMOS 600TVL
Drums :
Voltage: 1s 4.35v HV
Capacity: 450 mAh
Discharge index: 80c / 160c
Protective glasses (RTF only):
Maximum appearance size: 140 × 153 × 90 (mm)
Weight (without battery): 398g
Resolution: 480 × 272
Battery: 18650 lipo 1 cell
EMAX E6 transmitter (RTF only):
Maximum appearance size: 181 × 213 × 80 (mm)
Weight (without battery): 211g
Number of Channels: 6 Channels
Transmission frequency: 2.4 GHz ISM Band (2400 MHz ~ 2483.5 MHz)
Output power: 22 dbm
Modulation GFSK
Battery: 18650 lipo 1 cell
BNF (Bind-N-Fly): delivered with drone only.
RTF (Ready to fly): delivered with drone + glasses + controller.
FUNCTIONALITIES:
- 75mm indoor racing drone
- Brushless motor with durable ball bearing for increased flight and low maintenance
- Durable polypropylene plastic frame with propeller guard
- Engine beep function. Find your tinyhawk after a crash
- Speeds up to 56 km/h
- Up to 4 minutes of flight time with a single battery
- Fast F4 processor for smooth and stable flight characteristics
- Gyro MPU6000 for vibration-free operations
- Unique inverted motor design helps keep center of gravity as low as possible to accommodate tight spaces
- 25mw VTX and 600tvl camera included for fun FPV flight via FPV style goggles
- Smart Audio function to change the VTX channel via your transmitter
- OSD settings control to customize the flying sensation
- Factory preset for expert pilots and new pilots. 3 profile settings for all types of flying sensations
- Plug-in motors for easy maintenance
- 1s high voltage (HV) 450 mah lipo included
- Frsky compatible D8 receiver integrated into FC
- Carbon Fiber Themed Carry Case
PACKAGE :
BNF version:
1 x Tinyhawk FPV Racing Drone
1 x Lightweight Carrying Case, Carbon Fiber Look
1 x USB high voltage compatible 4 port USB charger
1 x 1s high voltage lipo battery (HV) 450mah
RTF Version:
1 x Tinyhawk FPV Racing Drone
1 x Lightweight Carrying Case, Carbon Fiber Look
1 x USB high voltage compatible 4 port USB charger
1 x 1s high voltage lipo battery (HV) 450mah
1 x FPV goggles
1 x Transmitter
1 x USB cable for charging goggles, radio
1 x bag of coins
1 x Phillips screwdriver
2 x 18650 Battery already pre-installed
1 set of AVAN Tinyhawk 3 spare 3 blade propellers.
Brand Name: Emax
Item Name: Tinyhawk
Main PCB:
Flight controller: F4 (MATEKF411 firmware)
ESC: 4 in 1 3A
Receiver: EMAX Tiny Receiver (Compatible with Frsky D8 mode)
Camera and VTX:
VTX Power: 25mw
Channels: 37CH
Camera properties: CMOS 600TVL
Drums :
Voltage: 1s 4.35v HV
Capacity: 450 mAh
Discharge index: 80c / 160c
Protective glasses (RTF only):
Maximum appearance size: 140 × 153 × 90 (mm)
Weight (without battery): 398g
Resolution: 480 × 272
Battery: 18650 lipo 1 cell
EMAX E6 transmitter (RTF only):
Maximum appearance size: 181 × 213 × 80 (mm)
Weight (without battery): 211g
Number of Channels: 6 Channels
Transmission frequency: 2.4 GHz ISM Band (2400 MHz ~ 2483.5 MHz)
Output power: 22 dbm
Modulation GFSK
Battery: 18650 lipo 1 cell
BNF (Bind-N-Fly): delivered with drone only.
RTF (Ready to fly): delivered with drone + glasses + controller.
FUNCTIONALITIES:
- 75mm indoor racing drone
- Brushless motor with durable ball bearing for increased flight and low maintenance
- Durable polypropylene plastic frame with propeller guard
- Engine beep function. Find your tinyhawk after a crash
- Speeds up to 56 km/h
- Up to 4 minutes of flight time with a single battery
- Fast F4 processor for smooth and stable flight characteristics
- Gyro MPU6000 for vibration-free operations
- Unique inverted motor design helps keep center of gravity as low as possible to accommodate tight spaces
- 25mw VTX and 600tvl camera included for fun FPV flight via FPV style goggles
- Smart Audio function to change the VTX channel via your transmitter
- OSD settings control to customize the flying sensation
- Factory preset for expert pilots and new pilots. 3 profile settings for all types of flying sensations
- Plug-in motors for easy maintenance
- 1s high voltage (HV) 450 mah lipo included
- Frsky compatible D8 receiver integrated into FC
- Carbon Fiber Themed Carry Case
PACKAGE :
BNF version:
1 x Tinyhawk FPV Racing Drone
1 x Lightweight Carrying Case, Carbon Fiber Look
1 x USB high voltage compatible 4 port USB charger
1 x 1s high voltage lipo battery (HV) 450mah
RTF Version:
1 x Tinyhawk FPV Racing Drone
1 x Lightweight Carrying Case, Carbon Fiber Look
1 x USB high voltage compatible 4 port USB charger
1 x 1s high voltage lipo battery (HV) 450mah
1 x FPV goggles
1 x Transmitter
1 x USB cable for charging goggles, radio
1 x bag of coins
1 x Phillips screwdriver
2 x 18650 Battery already pre-installed
1 set of AVAN Tinyhawk 3 spare 3 blade propellers.
